Dot Matrix

Printing issues with Dot Matrix pin-feed printers

Epson Dot Matrix printer prints one tag then skips two or three
If you have a Dot Matrix Epson LQ590 or similar model printer, you might have difficulty printing multiple tags.  The printer will print the first tag fine,...
Wed, 26 Mar, 2014 at 6:42 AM
Printed text falls above or below preprinted lines on tags
This is usually caused by not aligning the top of the first tag properly in pin-feed rollers when you load the tags in to the printer.  If your printer has ...
Fri, 28 Mar, 2014 at 3:36 AM
Printing falls too far left or right overlapping pre-printed text
For Dot Matrix printers, horizontal alignment is usually controlled by sliding the pin-feed wheels right or left on the carriage -- starting with them cen...
Fri, 7 Nov, 2014 at 5:56 AM
How can I keep a record or history of my printed tags?
Records of your printed tags can be kept in a rolling 'Tag History'.  If the 'History' button in the lower right of the tag screen...
Thu, 13 Nov, 2014 at 6:33 AM